제품 매개 변수 :

드라이버 칩 : L298N 듀얼 H-브리지 DC 모터 드라이버 칩

터미널 공급 영역 운영 폭 : +5 V 에서 +35 V, 전원공급이 필요한 경우 : +7 V 애서 +35 V

driven part of the peak current Io : 2A

터미널 공급 영역 logical part : +5 V 에서 +7 V (can board to take power +5 V)

전류 운영 범위 Logical part : 0 ~ 36 mA

제어 신호 입력 전압 범위 : 
낮은 레벨 : -0.3V ≤ Vin ≤ 1.5V
하이 레벨 : 2.3V ≤ Vin ≤ Vss

사용 신호 입력 전압 범위 
낮은 레벨 : -0.3 ≤ Vin ≤ 1.5V (제어 신호 유효) 
하이 레벨: 2.3V ≤ Vin ≤ Vss (제어 신호)

최대 소비 전력 : 20W (온도 T = 75 ° C)

저장 온도 : -25 ℃ ~ 130 ℃

드라이버 보드 크기 : 53mm * 43mm

드라이버 보드 무게 : 35g

확장 :. 제어 방향 표시기, the logic part of the plate to take power interface.



Instructions for use:

Stepper motor driver: board of ENA and ENB is high here refers to the level of a TTL level. ENA for the A1 and A2 make terminal, ENB can end so as B1 and IB2. BJ public access stepper motor end. The stepper motor control logic is as follows, wherein A, B, C, D of the four coils of the stepper motor, of 1 indicates a high level of 0 refers to a low level. Coil wiring diagram is shown below (for example) to a four-phase stepper motor.